Recently purchased a nb miata that had an intake with an open filter. Didn't look that cool because the filter was right next to the exhaust manifold and looked out of place. It did sound cool but I know on a warm day, the air intake temps where ready 125 degs++. Installed the fm randell intake. Not only did it look proper in the engine bay (made for a clean oe look), induction noise was perfect👌because the intake is closer to the drivers seat. Also very functional. Air intake temps dropped over 30 degs. Great product. Thanks again FM!!!

2000 SE, both rear calipers were leaking. This kit and the video made it a pretty easy fix.

This kit is amazing. I didn't realize how much noise I had it the cabin until I installed this kit.And I didn't have a complaint about it before. Also,after driving in town & on the highway there is an almost imperceptable amount of heat on the shifter or shifter boot.I almost didn't buy it as I felt i really only needed the shifter rebuild kit.but since I was already going to be in there i thought why not. Well it made such a difference that I may add more insulation to other parts of the interior later.Thanks

All the parts were just like my old parts,but they were oem parts in oem mazda bags. Every thing fit but I had a hard time removing my old torn rubber boot from my shifter. (The one with the 3 10mm bolts). If I had an exacto knife it would have been simple. I just drilled one of the holes a little larger &used channel locks to split it open to remove it from my shifter. Both rubbers were torn.Car has 80k miles on it. It shifts really good now.Definately worth doing. It took me about an hour but if I had to do it again I could do it in about half than time.The part arrived 1 day earlier than originally scheduled, definitely a plus. Thanks

Replaced all the rubber bits when I changed out the OEM shocks to the Koni STR.T shocks. All the original parts were worn out. This is a very inexpensive way to make your Miata feel like it did when it was new.

The old bushings were completely worn out. The new bushings restored a like new feeling to the suspension. This is a very inexpensive way to make your Miata feel like it did off the showroom floor.

This team is so knowledgeable. We purchased the stage 2 suspension. There was a problem with the end links and Matt at FM knew right away what the issue was. He had the correct parts shipped out the next day without question. We will order all of our parts for our little NA from this company as they are so easy to work with.

It's a great looking piece of equipment and it works quite well. It was reasonably easy to install. I'm glad we came across this intake. Thanks

Thank you for having a timely response to the delivery and I appreciate your help
Please keep the Miata world alive

Wanted bronze, and these had the design I liked best.
15x8 on 205 conti es02, at 12.5front and 13 rear, no rubbing.

Just had the Koni STR.T shock and bump stop kit installed on my 2008 Miata that had 29000 miles on it. I wanted a comfortable ride and an improvement in handling, and this kit delivered. The ride is at least as comfortable as stock (maybe better) and the handling is definitely improved. The car feels tighter and more composed while being comfortable to drive. For myself (a senior citizen) this kit provides the perfect balance between ride and better than stock handling. It is like I am driving a new Miata, but with improved handling. Also, my mechanic said that the original bump stops had completely disintegrated and all the other rubber parts were worn out, so it was smart to follow Flying Miata’s advice and replace those also. This purchase was well worth the investment.

I'd like to start this review by thanking Flyin' Miata for their honest approach to selling products that are actually what they say they are. After talking to their customer service, I was guided to these brakes and not hard or soft sold on something bigger and more expensive. These are perfect for my daily (spirited) driven 2000 miata. I was blessed with an incredibly low milage example car, that while making it into a race car would be fun, will be better left to my non pristine earlier car. These brakes are genuinely amazing and immediately have a noticeable difference from the factory originals. Surprisingly turn in around bumpy corners has improved drastically. Probably due to the reduction of unsprung weight. I was even able to fit these behind the factory 14x6" wheels although just barely. I will be changing wheels when I add the rear half of the set as I'm pretty confident they will need more space back there. Instalation was pretty basic unless you forget thread sealant like I did and had to bleed the brakes twice. Oops. Thanks FM for being a company that cares about their customers.

Made it from Detroit to Tennessee!

Uncomplicated install, can be difficult due to the small amount of room and stiff plastic panel where this controller needs to be installed.

After installation - works perfectly, no issues. Amazing product!

I installed the Flyin Miata butterfly brace on my 1996 NA and the exhaust was touching the brace in the front. I replaced the sagging 30 year old rubber exhaust hanger with this poly hanger and it completely resolved the issue. Installation was not that difficult.