Customer Reviews
Easy install and works great, a must if you install led bulbs to modernize the Miata look. It also works with regular bulbs so you can take advantage of the “ tap to pass” feature . Also allows the parking lights to light up upon pressing the lock/unlock buttons on remote . Super great add on :)
(En) Honestly, it’s a great product to finally solve the Hyper Flash problem on a Miata. Easy to install thanks to the user guide. No more HyperFlash and the two additional options are great, the tap-to-turn and the Courtesy lights makes your car modernized.
(Fr) Honnêtement, c’est vraiment le produit qu’il vous faut pour enfin résoudre le problème d’HyperFlash sur votre MX-5. C’est assez simple d’installer ce relais grâce au manuel d’installation. Plus d’HyperFlash si vous utilisez comme moi des LED sur l’ensemble des clignotants.
Enfin, les deux options qui viennent avec ce produit apportent une jolie touche de modernité a votre véhicule, les clignotants "automatiques" de 3 à 6 clignotements grâce a une seule pression sur le commodo. Mais également, la veille des clignotants durant 30s lorsque vous verrouillez ou déverrouillez votre Miata.
It works great, my Miata is now more modern with soft touch and coming home lights! and the installation was the easiest no more than 20 mins.
Highly recommend!
I bought this for my NC so I could use LED bulbs without hyper flashing, but it has some nice side benefits. The new flasher is louder than the stock unit, so you're less likely to leave your blinker on for ten miles after completing the turn, LOL! The parking light feature, that leaves the parking lights on for thirty (30) seconds after shutting off the car is nice, but I worry that my five (5) year old battery may not be up to snuff when the weather gets cold. It's due for replacement before the snow flies, so that will help. I am still waiting for the incandescent bulbs to burn out before I replace the exterior bulbs with LED's, so no information on the hyper flashing issue yet. I've set the flasher for six (6) flashes after cancelling the signal, but I may adjust that slightly. A little pricey, but worth it to avoid the need for ballast resistors when running with LED bulbs, since the ballast resistors throw away one of the LED bulbs biggest advantages: low current draw. Adding resistors to increase the current draw so that the flasher "sees" the same load as an incandescent bulb isn't ideal, IMHO.