Skip to product information
1 of 5

Gas cap holder kit NB

Gas cap holder kit NB

Regular price $14.99 USD
Regular price Sale price $14.99 USD
Sale Sold out
More expected on Mar 10, 2024.





Fits: 1999, 2000, 2001, 2002, 2003, 2004, 2004 MSM, 2005, 2005 MSM

Emissions: Emissions do not apply.

Shipping restrictions: None

Warranty: 1 year

View full details

Filling up your car is really pretty easy, but there's one major annoyance - where did Mazda expect us to put the cap? Dangle it off that tail so it'll scratch the paint? Nope. It'll mostly fit next to the filler neck, but that's not exactly ideal. This is an easy solution to give you a perfect spot for it. It installs in the underside of the filler lid and gives you a perfect place the hold the filler cap - just give it a quick turn into place. As with all of our 3D-printed parts, this is printed out of Onyx, a carbon fiber infused nylon that's resistant to many things, including gasoline.

Despite the angled cut, it's very easy to thread the cap into this piece. This is because of how coarse the threads are. The angled cut is necessary for clearance. 

This will only fit factory fuel filler doors, it likely won't fit aftermarket fuel filler lids. 

Customer Reviews

Based on 3 reviews
Perfect fit and no issues with directions or installation

I rotated the tether base CCW at the top of the fuel fill tube.
To do so, I removed 2 of the screws that were obstructing the rotation.
Another review mentions pulling the tabs and that is also an option.
Also, pay attention to how the cap is installed in the holder.
A CCW or CW twist may put tension on the tether in such a way as to "pull" the lid shut and not allow it to remain up and fully open.
The reason I rotated the retaining clip was to get the tether further out of the way of the Pump Nozzle when filling up.
Amazing fit and finish of this product and really made me wonder IF any touch-up or clean-up was needed or is this just how good it is out of the printer?
Great execution and great product!

Believe it or not, these are 100% untouched out of the printers - just one of the many reasons we love our Markforged printers!

It’s the little things that matter

I'm always looking for an aftermarket item to add improvement to my 2005 MSM. This Gas Cap holder looked like a good add and it is! I had to laugh about the installation. I read the instructions a couple of times .... it took longet to read the instructions that to install the holder. Only 'issue' I had was the plastic 'laynard' on my gas cap wanted to pull the gas cap closed. But a small screwdriver allowed me to open the 3 'tangs' that hold the retention ring down against one of the four screws holding the fuel neck. Rotated to the retainer so that the plastic 'laynard' was not under tension when csp in the holder all is good. Holder snaps into position easily. I did not even need to use the gas cap an installation tool ( sorry FM, I deviated from your procedure ... hopefully that does not void the holders' Warranty ;) )

Little Things Matter

I saw the video and ordered the part right away (which is good because they're sold out as of this writing). Once I received it and installed it without much issue I grabbed my side cutters and made short work of the tether on the gas cap which was an irritant that had been promoted to a pain in the neck. What a great solution that works as advertised.