Skip to product information
1 of 3

FM V-Maxx Classic Stage 2 suspension kit for NB

FM V-Maxx Classic Stage 2 suspension kit for NB

Regular price $1,029.04 USD
Regular price Sale price $1,029.04 USD
Sale Sold out

SKU

13-16720NB

Instructions

Data

Emissions: Emissions do not apply.

There are no shipping restrictions on this item.

Warranty: 2 years

View full details

V-Maxx coilovers give you an adjustable setup for ride and handling. FM sway bars let you adjust your handling balance and make the car corner flatter and transition faster. Mix them together and you get the V-Maxx stage 2 kit - an excellent recipe for handling. It's what the Hammerhead teams used at the punishing Targa Newfoundland.

About the sway bars:

Sway bars are used to make your car corner flatter and react faster by keeping the body (and all the weight) under control. Ours are set up for neutral handling and are adjustable so you can tailor the handling of your Miata to your own driving style.

Our swaybars are hot formed from 4140 CrMo spring steel. This means they're stronger than the cold-formed bars found elsewhere. We've designed them to keep the same handling balance as your stock sways, but they have two settings in the front and three in the rear for fine-tuning. Includes brackets and urethane bushings with waterproof grease.

NB sizes are 1.0" front and 0.625" rear. They're a little bit stiffer than the factory Mazdaspeed ones, but more importantly the factory ones are not adjustable.

About the V-Maxx:

Improved! The rear shocks now have offset bushings for extra clearance between the spring and the halfshafts. This gives you a wider range of height adjustment. We have also gone to a single long front spring to give maximum travel without coil bind.

You'd be amazed at how many suspension systems we test at Flyin' Miata. Even with a full line of parts, we're always looking for good options to pass along to our customers. When we first tried the V-Maxx suspension from the Netherlands, we didn't expect it to be any good due to the low price. To our surprise, it was better than most - but it wasn't quite right. So we changed the spring rates and bumpstop design until we had an end result that met our expectations, and worked with the manufacturer to bring our version to market.

So what makes them work?

The fixed shock damping is well-matched to the springs. A 1/2" shorter rear shock body gives extra compression travel for improved ride and handling, even at lower ride heights. Since the spring perch is adjustable, you have full control over ride height and cornerweighting. The spring rates are 391 lb/in in the front and 258 lb/in in the rear, which gives a good handling balance.

The stock upper mounts are retained. They also have a two-year warranty and are available in a TUV approved version with different rear spring rates.

They're not quite in the same league as our top-level coilovers terms of outright speed, but they do offer excellent value and are a good choice for someone who wants an inexpensive coilover setup. Includes front and rear springs, four shocks, adjusting tools and bumpstops.

We recommend the use of factory upper mounts only. It's also the best choice for a car with a V8 swap.

Customer Reviews

Based on 1 review Write a review