Banks PedalMonster
Banks PedalMonster
Collapsible content
Description
Your Miata has drive-by-wire (DBW), and DBW is bad, right? Maybe. Some cars (we're looking at you, Toyota) are very aggressive in acting like they know better, and what you request at the gas pedal isn't necessarily what happens at the engine. Fortunately, the Miata isn't like that - in our experience, it's (almost always) nearly a 1:1 relationship between the gas pedal and the throttle on the engine, especially if you turn traction control off.
But still... Wouldn't it be better if your car had a bigger engine? The Banks PedalMonster won't do that, but it will make it feel like you have a bigger engine. It smoothly and evenly increases how much the throttle opens relative to the gas pedal position - the chart above describes it best. Will it make your car faster? Definitely not, wide open throttle won't change at all. Will it make your car feel faster at part throttle? Sure will. We were fully prepared to dismiss this as unnecessary, but it makes the car feel surprisingly good and much stronger than you would expect. This isn't the kind of thing we'd typically recommend for a track car that spends most of its time at full throttle - although it would still work well - but it's great for a street car where you'd like it to feel like you have a little more oomph. Note that - once you choose your setting - it always does the same thing, so it's not a variable thing that you always have to re-calibrate to. Smart.
Naturally, being a Banks product, this is very smartly engineered. It's an easy plug-in to OBD-II and your stock pedal assembly. Zero wiring, two easy plugs. Why does it need to plug into OBD-II, when there's power going to the pedal assembly? Two reasons. First, the stock pedal assembly only gets 5 Volts, and adding more electrical load to that circuit can make bad things happen - OBD-II gives it 12V via a safe source. Second, if anything were to happen to the PedalMonster (which is extremely unlikely), your pedal would revert to normal - no getting stranded, no check engine lights, no funny business. It also allows it know things and conduct itself accordingly.
This is easily controlled and adjusted by an iDash or the Banks Power app (for Apple and Android) for your phone. There are lots of levels of boost, so you can dial in exactly what feels right to you.
This works with both manual and auto NDs. There are actually different calibrations for both, just choose which you have in the app (or iDash if you're using that as well).
Instructions
Shipping
What does it fit?
Fits: 2016, 2017, 2017 RF, 2018, 2018 RF, 2019, 2019 RF, 2020, 2020 RF, 2021, 2021 RF, 2022, 2022 RF
Emissions
Emissions do not apply.
Warranty
1 year
SKU
I'm not ready for a tune yet, and hated the glacial throttle response.
This really, really makes a difference! I tried all the profiles at various levels, and have stayed at Track 10.
No more ludicrous lag, as well as only having to press part throttle to get moving (as long as you're at 3k+)
A small minus: there is no reverse detection for Mazdas, though because the unit reads OBDII data, it doesn't do anything below 10 MPH
I combined this with iDASH, as I both wanted the abundant info iDASH provides, as well as having a hard-wired controller.
'23 RF Club
I added this last spring in conjunction with a twin iDash mod. Back before FM carried them. It's a very easy install and works flawlessly.
Okay FM describes it perfectly, Mazda did a great job of mapping the throttle, however I did notice the at the track level it makes rev matching easier. Gives you another control. It seems to duplicate a custom tune with out screwing up your warranty. This mod leaves no tattle tale signs on you ecu. I like the versatility and I am happy with it.
PS on other cars that have crappy throttle maps (like my 2016 Subaru.) it is an OMG game changer - a must have. Huge huge difference. Woke that car up.