https://flyinmiata.com/products/stage-2-front-sway-bar-mount-reinforcement-kit-for-nd
Join Kyle Tigar, our Miata Master Mechanic, in the FM Shop as we install our ND Stage 2 front sway bar reinforcement kit. We'll walk you through what you'll receive in the kit, the tools required, and every step of the installation. This is a bolt-on installation with no welding.
Did you know, ND Miatas actually have the ability rip their sway bar mounts off the subframe under hard cornering with uprated sway bars? The fix is a new subframe. That's an expensive repair! Our stage 2 reinforcement kit incorporates our billet sway bar brackets to help keep your sway bar where it needs to be. You need sway bar brackets anyhow, why not make them structural?
Note: These brackets work with FM sway bars and bushings only. Available only at Flyin' Miata!
If you have issues, concerns, or questions about your install, please review our written instructions for this kit - available on our website - or feel free to contact us.
Please like this video and subscribe to our channel for more Miata content!
Chapters:
00:00 Intro
00:18 Kit Components
00:37 Tools
01:15 Foreword
01:38 Lift car, remove wheels
01:58 Remove fender liners
03:25 Remove splash pan
04:14 Remove plastic air guides
05:12 Remove sway bar brackets
07:05 Move coolant pipe
08:54 Install sway bars if needed
09:12 Remove subframe nut
09:50 Install reinforcement bracket
11:54 Install bushing and billet bracket
14:40 Install hardware
16:58 Coolant pipe reassembly
20:38 Reinstall air guide
21:21 Driver's side disassembly
22:46 Driver's side installation
26:50 Reassembly
30:32 Final Words