Welcome to Flyin' Miata
We are an employee-owned coop with one goal: to make your Miata more fun to drive. Our emphasis is on well-engineered, quality products with the best support available.
Shop for Miata parts now
Let customers speak for us
from 2594 reviewsGreat service . Bought Miata stainless brake lines.
Mine was torn this perfectly replaced it on my ‘91 Miata.
The install is pretty simple but very tedious. The process of taking everything apart is fine, but watch out when seating the roll bar because mine was slightly offset because of an adhesive that prevented the metal from being flush against the car. It’s a bummer that the seatbelts become pretty useless after installation. Also if you’re tall (6’1”) it’s honestly more of a hazard because you will smash your head up against it. Highly suggest the cushion for that but even then it’s a hazard. Overall it fits and does it job so everything else is just more to consider personally. (2005 MSM)
Made the swap easier
Made the swap easier
The aluminum latch locks work perfectly. I replaced a worn down pair on my '90 NA and it was a simple job. Both locks clicked into place after replacement. The peace of mind is real.
They sent a sweet Miata sticker with my purchased item.
Great product! Big improvement on the OE part. I didn’t realize I needed the latch caps too. Turns out they sit over existing protrusions. Hard to tell unless you remove the latch assembly first. So remove your latch assemblies before ordering and check your caps too!
Super thick and sturdy compared to stock. Makes shifting feel sturdy and strong. Rebuilt shifter with this shift boot is a must. The boot rolls roycefied the interior with how much sound it blocks out! Fantastic product and thank you for the sick stickers.
My shifter was in need of a rebuild because the boots were worn so bad that they tore and leaked head oil onto my exhaust. Shifter felt 10x better! So smooth and sturdy, helped a lot with sound deadening too
My '95 came with the stock skinny shift knob and I absolutely hated it. Poked around at all the usual suspects for Miata aftermarket and compared them all including ridiculously over priced flashy shift knobs and more "race oriented" shift knobs.
Decided to just go for it and boy am I happy I did. It's not flashy at all but it feels extremely good in your hand. Rowing threw the gears has never felt so satisfying. Sitting in 90+ degree heat in direct sun it gets warm but not scalding. The weight is just right, the size and shape is perfect for my hand. Totally worthwhile mod and something I would highly recommend, makes interfacing with the car even more of a joy.
Decided to replace the rubber door bushings my '95 came with. Ordered a few days ahead of an autox event and had them arrive the day before the event. Definitely a noticeable difference. Any bit of body stiffening on the NA helps and this is a cheap no-brainer. Installation took 2 minutes, and that included cleaning the muck from under (what I'm assuming were original) bushings.
Highly recommended.
Very nicely put together kit
High quality product
I have been using this for multiple jobs in the last week and it has held up perfectly. I haven’t even used it on my Miata yet but as it is a good half ton lighter I imagine this will get the job done just as well. I wish I had bought this a long time ago - it would have saved my fragile seams from becoming the mangled flattened mess they are today.
Get some great information
-
FM Video
Grab your popcornHundreds of informative videos from our team of experts covering every aspect of the Miata.
-
Newsletter
It's free!Sign up to get notified about sales, new products, special events and more Miata news. 1-2 emails per month.
-
Knowledge base
Check it out!Full of technical articles, customer support and answers to your questions.
Newest products
For products specific to your model, use the menu at the top of the page.
-
Fan shroud, 1990-05
Regular price $66.49 USDRegular priceUnit price / per -
Bolt, M6 x 60mm x 1.0, Hex
Regular price $0.79 USDRegular priceUnit price / per -
Breaker, 50amp, Type 2
Regular price $10.99 USDRegular priceUnit price / per -
Fan Shroud, for Stage 2 brushless fans, 1990-2005
Regular price $149.00 USDRegular priceUnit price / per -
NC gas cap holder kit
Regular price $19.99 USDRegular priceUnit price / per -
FM door bushings, second generation
Regular price $19.99 USDRegular priceUnit price / per -
RGR Engineering rear diffuser for NB
Regular price $640.00 USDRegular priceUnit price / per -
RGR Engineering rear diffuser for NA
Regular price $640.00 USDRegular priceUnit price / per -
RGR Engineering side skirt for NA
Regular price $425.00 USDRegular priceUnit price / per -
RGR Engineering side skirt kit for NB
Regular price From $425.00 USDRegular priceUnit price / per -
Wilwood rear brake rotor (only) for NA/NB rear 2-pc rotors
Regular price $155.00 USDRegular priceUnit price / per -
Muffler solenoid bracket for ND Hush-o-Matic
Regular price $9.99 USDRegular priceUnit price / per -
Morimoto 2Stroke 4.0 LED headlights, H11/H9/H8, for 2004-15
Regular price $205.00 USDRegular priceUnit price / per -
Accessory belt, AC only with FM PS delete kit & 2004-05 compressor
Regular price $14.99 USDRegular priceUnit price / per -
RGR Engineering NB radiator bracket kit
Regular price From $34.99 USDRegular priceUnit price / per -
Alignment bolt, NC (front bolt of the rear subframe)
Regular price $20.99 USDRegular priceUnit price / per -
Alignment bolt, NC (rear bolt of the front subframe)
Regular price $23.99 USDRegular priceUnit price / per -
Alignment bolt, NC (front bolt of the front subframe OR rear bolt of the rear subframe)
Regular price $21.99 USDRegular priceUnit price / per -
Brake master cylinder brace, ND
Regular price $128.00 USDRegular priceUnit price / per -
LED resistor kit, 2016-2023
Regular price $35.99 USDRegular priceUnit price / per -
NB gas cap holder kit
Regular price $14.99 USDRegular priceUnit price / per -
Hub Stand Hanger kit
Regular price $34.99 USDRegular priceUnit price / per -
Megachip ND chip guards
Regular price From $119.00 USDRegular priceUnit price / per -
Extended, bull nose, grade 10.9 wheel studs
Regular price $26.99 USDRegular priceUnit price / per -
NA gas cap holder kit
Regular price $14.99 USDRegular priceUnit price / per