Flyin` Miata stage 2 suspension kit (Tokico)
See customer reviews of this product.
Stock alert: Available again in limited quantities. Please note that the NB version of the shocks are being discontinued, so there will be no more after our current shock is exhausted.
Our FM springs, FM sway bars and Tokico adjustable shocks were designed to work together. It`s what we use as our baseline for ride and handling - a suspension that can be driven on the interstate, on a daily commute and ripping around Laguna Seca. The sway bars let the car corner flatter and let you easily adjust the handling balance of the car, while the springs and shocks work together to keep the body under control. For the 1990-97 cars, we add a set of bumpstops to replace the factory rubber ones. We also include bumpstops for the 1999-05 cars as we`ve found the stock ones have often degraded by this point. Every Miata will be happier with a Stage 2 suspension.
How much will this kit lower your car? We can`t tell you, because Mazda changed the ride height of Miatas over the years. However, if you measure from the center of the wheel to the fender lip, you can compare your car to the final result. It`s not a huge drop but once you drive the car you`ll appreciate how well it works.
Specifications for the 1990-05 cars
Front springs: 318 lb/in
Rear springs: 233 lb/in
Front ride height: 12.5"
Rear ride height: 13"
Specifications for the 2006 and later cars
Front springs: 300 lb/in
Rear springs: 196 lb/in
Front ride height: 14.0"
Rear ride height: 13.5"
Includes sway bars and four springs and shocks. 1990-05 kits use the Tokico Illumina shock, 2006+ kits use the Tokico HTS. 1990-97 and 1999-05 kits also include four new bumpstops to replace the factory rubber for a better ride and more suspension travel. Compatible with all Miatas, including the newest power hardtop models and Miatas with ABS.
Confused by all the suspension packages? Check our package rundown.